[So Similar, Yet So Different]

Eyelashes are on that premium subscription 😩

“how did you get into writing” girl nobody gets into writing. writing shows up one day at your door and gets into you

Hello!

Your art is so gorgeous and inspirational!

Do you have any tips on drawing body horror and character design? When I've tried to design some characters with body horror they all end up looking rather friendly 😅

Hope you have a lovely day and thanks in advance!

Thank you! I'm happy to hear that! Here goes!

NEZ GUIDE TO BODY HORROR

(Disclaimer; this is my advice, not rules. Break them as you wish)

Despite not doing it on purpose, a lot of my art is tagged as body-horror. I've embraced it. Here are my 3 pillars for frightening art. I don't have to follow them all at once, at least one is enough.

Nature

Get inspired by nature. Not necessarily by gore and wounds, but by things that look normal in one context but might appear unsettling in another. A great example is my pumpkin creature; everyone has seen the insides of a pumpkin but adding that texture to a living body made everyone react more strongly to it. I highly recommend natural things with strange textures and patterns (especially seeds)

Book Recommendation; The Art and Science of Ernst Haeckel

I recently bought this for all the gorgeous pattern and creature drawings. It's a beautiful book for those who want to draw horror based on nature. Careful if you have tyrophobia, this has some INTENSE patterns.

Subtlety

In either execution or concept.

In execution; give the drawing other recognizable characteristics. The gore is NOT them, it's just part of them. An example would be my cowboy creature. They have the coat, the hat, the boots, the smile...and then you notice the heads. Give your character more than their frightening parts.

In concept; If you want the bright reds and obvious gore, follow one simple concept. In the example below, the concept was a wound surrounded by mushrooms. That is all. If I were to add 'but also mushrooms leave their eyes, and bloody tears fall from them, and they have gashes in their skin, and'' it would have made the impact of all of those concepts collapse. Like a bed of nails. The more nails you add, the less a single individual nail will hurt.

Feeling

It follows the theme above. I noticed horror works better when it's not an abudance but also when it's relatable. I've seen people react more intensely to an animated character brushing a line of yarn against their eyeball than an animated character having their head explode in blood, brains, and bone. You can draw from emotional feelings as well, turning your mental pain into a physical manifestation of it.

This is not a must follow because I do plenty horror art without being vulnerable nor making myself uncomfortable, I just notice people react when they can relate and feel it too.

I hope it helps anon!

stromg lady werewolf Tane

A concept art i make a few days ago

Love how tumblr has its own folk stories. Yeah the God of Arepo we’ve all heard the story and we all still cry about it. Yeah that one about the woman locked up for centuries finally getting free. That one about the witch who would marry anyone who could get her house key from her cat and it’s revealed she IS the cat after the narrator befriends the cat.

Book binding 101: Materials

I’ve decided to do a series of posts on how to book-bind since I talk about it a lot, and I think it’s a really fun process. These posts will include various inexpensive alternatives to “professional” supplies, many of which you will have at home. Not everyone can afford a cricut and that’s ok! I will also be listing more expensive materials for people who want to invest a bit more into the craft, but they absolutely are not a must.

This first post will focus on a list of supplies you can use to make books, but will not yet get into the instructional part of it. That will come later!

Anyway…

Bookbinding Materials: Essentials

These are items you need to bind, but many you can find around your house!

Sewing thread: Any thread will work for bookbinding, though waxed threads can help reduce tangles. You can also double up thread as another way to prevent tangling if you so choose. Waxed thread is definitely more expensive, so it can be good to use what you have starting out. Here’s a link to the waxed thread I used for those that are interested. You can buy it in a lot of different colors! (White is good if want an “invisible” thread).

Sewing needle: A lot of people say to use a curved needle for binding, but I’ve never found it to be much different from using a regular needle. If you have one, I would recommend a larger needle, however, since it’s better for piercing through signatures (aka the stacks of pages you bind together). In other words: there’s no special needle you need to bind books.

Ruler: I’d recommend any metal ruler since it’s better to use as a straight edge for cutting. There’s a good chance you already have one. It’s just used for measuring and being a straight edge. Nothing fancy.

Paper: Any paper will work. What you wanna use depends on your project really: if you’re binding together a work of text you’ll want to use some kind of printer paper (of course). If you’re making a sketchbook, you can fold up some sketching paper. I like to get sketchbooks with perforated edges so I can tear them out easily if I want to use a blank page for bookbinding. You can also buy large sheets of paper made for any medium. For example, if you want a sheet of water color paper, just search “large watercolor paper sheet”.

Awl (or all alternative): An awl is a tool used to poke sewing holes. It’s nice because it’s sharp and ergonomic, but you can totally also use a pushpin or even a sewing needle.

Bone folder (or a bone folder alternative): A bone folder creates sharp creases when you fold your pages, making them lay flatter. It also helps define the hinge gap on finished books, making it open easier. You can use a ruler if you don’t have one.

PVA glue: PVA glue is what to look out for when it comes to binding glue. There are some designed specifically for bookbinding, which spread out a bit faster than ones that aren’t. You can also use tacky glue which IS a PVA glue.

Book board: Also sometimes called chip board, Davey board, or mat board. This is what you’ll use for hard cover books. It is important to use book board specially, as cardboard will warp. You can buy book board directly, or you can cut the covers off of old textbooks or binders, unwrap the paper/plastic around the board, and use that!

Box cutter or utility knife: for cutting the board

Decorative paper and book cloth: For wrapping around cover boards and for endpapers. Book cloth can also be used to cover boards. You can also draw your own designs on Bristol paper if you want (or any paper with a similar thickness/durability). When it comes to decorative paper I like to either get scrapbook paper or rolls of fancy handmade paper (you can get those on Etsy, through paper source, or through bookbinding websites).

Bookbinding materials: Optional (and not crazy expensive)

These are supplies that you don’t need for binding but that can make the process easier and/or help with the decorative elements of your books. I’d recommend these things for when you’ve been binding for a while and feel these things could be helpful!

Paper trimmer: can cut a few sheets of paper evenly—I find it really helpful for endpapers

Stencils: Super helpful if you want to add text on the covers

Stamps: Good for adding text and also great for adding illustrations if you’re not able to draw them on your own. You can buy ink pads for them or use markers by coloring over the stamp lightly and using the stamp immediately so it doesn’t dry (I’ve tested this with alcohol markers and it works very well)

Paint markers: great for drawing directly on the cover. Since they’re opaque they can imitate the look of vinyl. You can also get them super painterly if you want. The internet usually talks about poscas but there are tons of different brands. Do some research, figure out what you like & can afford.

Hot foil pen & heat transfer foil: Perfect if you want to add foil to your covers but don’t want to spend a ton of money on a cricut. A lot of binders uses the foil quill brand, but there are ones that cost less and work the same (I have both a cheaper one & an actual foil quill because I wanted some nib variation. As long as the pen has good reviews that aren’t from bots you should be good). Also remember: don’t use foil designed for going through laminators (I.e. decofoil) . It doesn’t work the same way.

Bookbinding Materials—Expensive

These are materials I’d recommend for people who have been bookbinding for a while & feel that it’s something they really want to invest in. To be fully transparent, I’m a college student and don’t own these and have little personal experience with them. However, I know a lot of binders who love them!

Cricut machine—Cricuts are cutting machines that can make precise cuts into paper, wood, bookboard, or vinyl. A lot of binders will cut designs out of vinyl and apply them to the covers using a heat press.

Book press—What it sounds like. The pressure helps the pages lay flat and stay even. That being said you can stack heavy books on top of your projects, it just may not have the same even pressure. I also know some people will DIY these, so if you’re skilled with power tools you can give it a go!

Paper guillotine—like a paper trimmer but bigger and can cut more sheets of paper at once. I believe really good ones can also be used to cut bookboard!

Those are all the materials I can think of! Hope this can work as a good starting point for those interested in the craft. I’ll definitely be posting more info about bookbinding for people who are interested :)

-Zoë💗