✨Bouldering Wall !✨

✨41st Recon Squad Camp Site ! ✨

Closeups and other stuffs under the cut !

Backside :

Right scene closeup :

Campfire scene closeup :

Tomb scene closeup :

And finally, my personal favourite :

New lights, new camera settings, and a larger space…because this one didn’t fit the other one…Indeed, using shelves as a photo studio is not my brightest idea, but in my defence, it works.

This MOC has entirely been made because of the camouflage cloak I found in the bottom of a box. I don’t know where it’s from, but it looked very cool with that particular trooper, and thus I needed to show it off.

It was also helped because the large amount of olive green plants I received recently (those that are all over the place).

I tried something new, which is that I have not a rectangular base, but rather, three trapezoidal ones linked together to play with the shapes a little. Some parts were a pain to link together, but some tricks can help with that. The crates, for instance, are on top of a hole I couldn’t fill because of the odd shape.

The tombstone was actually the best idea I could get because I’m missing a trooper torso ! I can’t find it, and a pair of legs and a helmet are all I have left, and I might have watched Tales of the Jedi again recently, so that ended up being here.

The tent itself is made thanks to a fun discovery of mine, combining nets and my recent shipment of plants. I put a plant every three holes, in one line, and continue the pattern diagonally. In the back, to hold them in place, I used 1/2 technic bushes, which are quite convenient. And of course, this part is not connected to the poles at all, I case I want to add something in the tent.

Finally, some will notice the main incoherence of the thing : all the smaller wooden poles (tent and fire pit) are not birch-coloured. That’s mainly because finding the good pieces would have been a terrible hassle, and also because the campfire would really look weird in white.

Also, I might have spent an entire night on these trees to find what the colour balance and shape would look the more natural, I hope these are good.

A little replica of a wakeboard ski-lift I made as a present for a friend ! (Other views below)

The system is a little sturdy but it does the work, and the different white modules work as more than simply decoration !

(Sorry for the bad quality of that video-)

✨Cargo starship ! ✨

A 'little' part of a larger idea I’m developing~

Right under the cut, closeups and some explanations !

Tiny container carrier :

It’s small, it’s adorable, and I still haven’t figured to how the container will be properly held, so the entire system underneath is improvised and will be subject to changes, hopefully.

Cargo closeups :

Lot more to say about this ! Firstly, that the support I gave it is very unstable, but that should be fixed later.

I was playing around with the idea of a small ship with six rows of container in an hexagon, and ended using a combination of 3-branched crossed around a technic axe to do that. Then, one thing following an other, I needed up with two sections connected by one of these large rings like you see in some movies for gravitational purposes. The entirety of this piece, at the exception of the very beginning of it, it held by a single long technic axe. Obviously, large transparent-blue rods to make reactor trails and truncated cones as the reactor bases. The ring is held by rods, too, with an upside down tread — getting them to have a proper circular shape was a complicated journey.

The colourful containers were another fun thing to do : firstly, getting all the right pieces and make the pattern not too regular. And to pretend they’re all connected by nothing, they’re only partially connected, and 'held' by an electromagnetic field figured by the transparent blue pieces on each side of the container rows, which would then be picked by the small container carrier above.

And now, the most important thing : the reason of why I absolutely needed to make this cargo, instead of anything else. It’s quite simple, actually. I needed to get the scale of these containers. Because. Because I had this idea to make a large, large trading spare station with a ring around a large axis, which would be the perfect excuse to make an awful lot of small spaceships. And for that, I needed something for scale, and since it’s a trading station, a container was my best bet. So I have a plan, which I’ll elaborate on probably next week, along a batch of my small ships.

✨Custom air Toa !✨

6/6, that’s the last one ! And the biggest one, too-

Closeups under the cut !

Front/back views

As you might notice, it is tall. And it has more than four limbs, which would not be a problem if it was the only one. But. It appears that all my green mocs end up with too much limbs, and I can’t fathom why. Really, another prototype standing on my desk also has for and so does the green hero factory one…You get the idea.

Anyway, the colour scheme for this one is dark green and silver, with some translucent bright green accents. Using only bright green would have brought too much contrast with the others Toas (notably the dark red one), but I had these cool pieces to use and no one else to put them onto. And since these are experimental…

The two supplementary limbs are intended as movement claws, given that we usually see air Toas moving in jungles (Lewa mostly, that is). The silver pieces at the front and back ends are respectively Kopaka’s skis and Pohatu’s foot pieces (shoes ?). The largest bits are made out of technic pieces directly, to give some simple angles.

Bust views

I find this silver/green chest piece really cool, it’s a shame I don’t have much of them. The two bright pieces on either sides are Vahki head pieces, and since their only connectors are on their relative tops (side of the piece in their actual orientation), you may remark that they are connected to nothing. I’m having the arm socket go through them, and the rest of the body’s shape avoid too many movements. While nice, this also limits the movement range of the arms, but it works well enough (these are not really made to play, anyway~). The two bright pieces with spikes are from a Ehlek. Wish I could have managed to put that one back together, but it instead served a higher purpose.

The Kanohi is Hordika Matau’s, with transparent Bohrok eyes underneath (it share this technic with my previous white Toa). The back piece is coming from a Piraka, but it’s actually a broken piece. I have quite a bunch of these, where the mask and flexible parts have broken off, so I make the most of it (like you might see in the future on another MOC). I’m using technic angle (type 3, to be precise) to keep the shape of the middle ones, but the others are free.

Finally, a (dismantled) leg view.

Finally, the leg segment !

The Toa was too big for proper leg showcase, my lights created terrible contrasts (shelf not deep enough…), so here is a stand alone leg instead.

Once again I have integrated the Metru chest piece to the leg, but as a foot this time. It offers a good stability and looks nice.

The next part doesn’t have much interesting bits, except that I’m using technic tubes to hold the additional piece, making this technic less illegal that my usual works (keyword : less; there is still a whole lot of stress on these poor pieces).

The top part is…somewhat more complicated. The frame is of technic pieces (like the additional limbs), which keeps together an immobile socket joint which keeps the double socket and two Bohrok feet (one for decoration, one connected to the hip socket). The double socket is used both to connect the two halves of the leg and to hold the small arm piece which is here only for decoration.

And that’s it for this series ! I’m hoping to bring them to next month’s exhibition, along with some Bionicle MOCs I haven’t showcased here because…shelf…Given the sheer size of my big project (posted here next week in theory), I’m gonna have to improvise something quickly, and profite of it to get some pictures of my other big ones while I’m at it. Eh, I’ll figure it out (and if I don’t, I’ll just delete that statement later :}

Thanks for reading, have a good day !

✨Micro-Nether !✨

And a small wither to go with it~

There’s not much to say about this build, it’s mostly just a tiny box with triangles and cubes inside. I’m considering making more of these in the future (feel free to suggest biomes/mobs in my inbox !) while keeping the scale (8*8*8), which is a bit of a challenge, but it’s fun.

✨(Tiny) Agender pride flag✨

Want your flag to be made in Lego ? Simply ask (instructions can be provided if you ask nicely :} )

(See previous work here)

✨Bionicle…Rahi ?✨

Yeah, I’m not sure what that one exactly is…But I like it.

I don’t currently have any other Rahi in stock (well, I do have one but it’s terribly ugly), however I do have one in the making, which might be ready for next week. Else, I have a few other things I might get at (including a fancy idea since it’s pride month, which I’m hoping to manage to pull off…). Of course, if you have ideas, I’d gladly hear them !

Aaanyway, rant aside, building details under the cut !

For once, legs are utterly simple, since they’re all made of a single blade piece. Nevertheless, I had to use feet somewhere, so you might notice that the entire spine is made of feet piled on top of each other. They are only connected near the tail by a single socket.

Speaking of the tail, it’s made of a weapon piece of Nuju Metru, but the connector was all twisted so I couldn’t use it as a proper weapon. Well, it gives some movement to the beast, so it’s a great thing still.

Similarly, the tongue/flame (I’m still unsure of which it is meant to be) is a partially broken Tahu sword. It’s not actually held securely, because it’s inserted in the technic pin connector of the dark red shoulder blade I’m using as the face of the beast. On each side of this piece are silver Bohrok eyes as teeth, which themselves are partially covered with limb armor pieces.

The main body is not actually very complex, because I found a quite large red technic piece which looks somewhat like a throne and acts as a great base (if anyone has any idea where this piece comes from, based on this very unclear description, I’d like to know where it comes from); and four small blades placed horizontally to make the body slightly rounder.

You will notice this Rahi can actually more or less fit in my shelf studio, which is quite remarkable, because it means I don’t have to set up a temporary studio all over again. Might have to do it for the next build, though.

Also, I actually started my spreadsheet for bionicle gens ! (It incredibly tedious..)

✨Clone wars diorama !✨

Another one, technically the largest I have posted (yet~), featuring the 212th and a (placeholder) Jedi.

Of course, closeups and additional details below !

Views from directly in front/above :

Before I continue, I must confess it. This horrendous mistake, which you might spot by paying close attention to the right part of the image.

Yes. I somehow created an offset on the entirety of the wall’s height.

Overall, I’m quite happy with this one, mostly the environment, which turned out great (except for the offset….). What I’m not really sure leases with are the cheap AT-RTs from the battle packs, which are too bulky, but it works well enough for the moment, and since I’m not exposing to any connoisseur, it does the job.

Most of the minifigs are from these battle packs too, except for the Jedi, which is actually a savage oppress with a cloak, but every time I try to just remove the minifig, it feels like something is missing. The paratrooper captain has the hold grey kama and pauldron which always work well, even if it could have done with an additional visor.

Anyway, let’s get going with the closeups !

AT-RT scenes :

On the left, an engineer (my favorite kind of clone) fixing a broken down leg, with the help of one of the pilots. It was hard to get the minfigs in a 'lively' position, and the photo doesn’t render it correctly. The small white backpack is a piece I’ve stolen from the 501st specialist pack, because it’s nice.

On the right, a paratrooper with a completely inaccurate rocket launcher (the clone wars’ ones don’t look as cool, though). I quite like the way this part came together, even if it’s just a small detail.

Explosion scene :

I’ll admit it’s my first try with building explosions, and I’ll hopefully improve.

On the right, the clone says hi ! Well. No. He doesn’t, but it’s what he looks like on the photo, which I funny, I’ll admit, but not the image I wanted to convey, even if technically he’s set properly, as a projectile caused by the explosion.

The picture on the right convey the feeling of movement much better, with the clone shooting on the left, the others running along, and the paras being blown.

Other scenes :

The focus on the left is the droid ! I really like how it’s sprawled over that rock. Other droids can be found in the diorama, notably one being crushed by the rocket launcher AT-RT, partially under a rock, and part of one in the explosion.

On the right, we see a paratrooper down (but still fighting !) with, at his side, a medic applying a hypo. While it’s hard to see with this picture, he has a pouch at his side, and some chroma-black legs, because I was missing a pair of legs the medic has prosthetic legs, isn’t that awesome and convenient ? That is a lesson to learn, any lack can become lore ! Well, kind of. It’s what I also did with the Kashyyk MOC : I was missing all but the helmet of my ninth minifig, so I turned it into a grave of the missing squad member.

✨Snowman !✨

Couldn’t miss this year’s Christmas-themed MOC, of course ! Although it certainly is way less 'christmasy' than the previous ones (here and here) and more of a general winter decoration, it fits well.

There’s not a lot of technical work here, the spheres are classic designs which I tweaked a little, the arms are quite simple, the scarf has nothing complicated either; the only interesting bit might be the hat, because I used a really old technic piece — can’t find its id on bricklink… — with some other gears and such.

Anyway, merry Christmas to those who celebrate, and good day to everyone else !

Also, sorry for the terrible pic quality, I don’t have any proper set up; and I know I have a few things sitting in my inbox, I’ll get to it I swear.

✨Progress pride flag !✨

Yay ! Finally some colours ! This was definitely trickier to do, compared to all the other ones, because of the triangles, but I like how it looks !

See previous here.