Sunny Side Up

yume_primavi (Twitter)

The frost is back, time will tell if we will be blessed by snow or not. Some creatures are still roaming the fields, some to hunt for food some to fuel their mind by the beauty of the frost pattern.

I think that bluesky is a bust for me...I guess that I will try to finally figure out Tumblr lol.

I’ve had a blonde wig and regular MTM body on my custom Pullip by Mikiyochii for YEARS and wanted to try something different, so I switched to a brunette wig and a curvy MTM body - and I love it!

where's that picture that ruined my life

My dolls)

Photo by ig @gray_valet

Hi guys) The package with the previous mouse group order arrived in the US. The rest does not depend on me. So I'm making a post to show everything I can offer. Shipping from Russia is quite expensive, starts from about 70 USD for EMS, which I usually use. So it makes more sense for foreigners if someone organizes a group order to share the shipping cost. This has already been done twice. And I believe there is a discord group about this. But I will give you approximate numbers: This is about 70 USD for up to 1 kilogram 90 USD for up to 2 kilograms and about 105 USD for up to 3 kilograms.

This post is going to be huge so I'll put the prices on top:

15cm mouse. 73 usd for standard colour. +7 usd for extra colour.

25cm turtle. 230 usd.

28 cm 1/6 boy doll. 110 usd for Eirwyn 120 for character heads cause of their hair/ear parts.

MSD Eirwyn. 180 usd.

Speaking of group orders I would prefer not to go above 1000 USD in one box because I don't trust US Customs one bit. And if something bad is destined to happen - I would prefer it not to be a terribly large amount of money.

I can change the prices over time. I most likely will. I'm just groping for a while. The difference in price is more due to the amount of manual work I have to put into the doll than to the size. Turtles are far and away the most complex. And human dolls are less time-consuming. If I make a few and feel that it is more difficult or easier than I thought - I will change the prices. As you can see, so far I have only sold mice.

So what do I offer?

I'm obviously offering mice.

This is around life size mouse doll. Almost 15 cm standing tall and including ears.

I use ABS-like photopolymer resin for these dolls. Because it is easier to work with and looks more polyurethane-like. Mice have a lot of small delicate parts that would be harder to make look good with a harder resin. So it's a tradeoff. I prefer aesthetics over durability. I am not saying that ABS-like resin is too brittle. Many people use this type of resin for dolls. Especially small ones. I am just explaining why I use different types of resin for different dolls. I might consider printing a mouse with the tough resin I use for my larger dolls but that would cost more because it would take more time to post-process.

The colors "from the can" are gray and white. I can also print beige and chocolate at any time. Because these are the most basic colors and I can cut the leftovers. (Beige and chocolate may differ slightly from time to time because I due them myself. White and gray are constant.)

I can mix any color (green, purple). But there must be 2 or more mice of this color in the order. Otherwise it will be counted as an extra color because I will have a lot of leftovers that I will not be able to use.

There is also an option to add pink paws or tail or both. If the doll has 2 colors in it, it is counted as an extra color.

2. Turtles.

Photo by ig @gray_valet

Yes, I finally decided to try and start selling them.

They are 1/6 size. About 25 cm. A little shorter than Barbie. But wide and heavy.

There are 4 sculpts. Each of which has an individual head and some differences in the body.

Officially I name the sculpts by numbers, not by character names. but I think the characters are pretty obvious.

So #1 (Leo)) He's my princess >W< Lol. Sorry. This sculpt is quite beefy. But has the most delicate face and front shell of them all for my taste.

№2 (Raph)

This one the widest and most monstrous of them all. He was actually designed to be a little shorter than the first one, but he refused and ended up the same height.

№3 (Don) He is a little taller and thinner than the others. I tried to make him more human in proportions and face.

№4 (Mike) He's the baby of the group. I still wonder if I made him too small. But I like him as is.

Each of them has 3 faces on magnets. Neutral, angry and happy.

For turtle dolls I use a tough resin. Because they are actually big, even though they are short. And they have quite a strong elastic tension. It's a little less pretty than the ABS-like. But it's really tough. I have a video of me throwing it on the pavement.

Turtles have 3 colors. For the skin, plastron and shell. You can send me a picture and I will try to dye the resin as close as I can.

I will add 2 pairs of the chosen color eyes and 1 pair of white to the doll.

I can also print basic katanas and sais in a size suitable for the doll. In a random color.

3. 1/6 youth doll.

This body is about 28cm and is sculpted to represent a teenage boy in a Barbie-proportioned world.

This can go with my original Eirwin head and resin hair

Or an anime head with a hairstyle representing a character from the Genshin Impact game.

(Keep in mind that 1/6 of the sculpts has sculpted eyelashes) At the moment I have

Tighnari with magnetic ears (It's my friend's doll)))

and Cyno

Lol I even made his hair articulated.

I also tried to put a Barbie head on this body and it wasn't terrible)

I print these dolls with tough resin as well. Even though they are small they aren't very detailed so it's just nice to have a little more durability.

I can try to dye the color you want. But I can't promise 100% accuracy because one is the pictures on the screen and the other is the resin and pigments. And also I do not recommend dark skin colors. because this resin is very thick and it can reject the pigment while printing. With dark colors it can lead to a slight difference of the color between parts in one doll.

And last but not least...

4. MSD Eirwyn.

The MSD version of this sculpt has some differences from the 1/6 version. It has a wider neck, smaller eyes, and no sculpted eyelashes.

Eirvin is 45cm tall and is adjusted to fit into my company MSD doll group. (Photos with Dollzone and Resinsoul)

10mm eyes, 55mm feet. The only non-standard part of him is his butt. It's quite wide for a MSD) But I like the silhouette.

I print my dolls with full infill so it weighs the same as the cast doll.

Obviously I'm printing such a big doll with tough resin. And with such a size of parts I'm mostly calm for this doll. My cat has already given it a couple of test falls from the table.

For color - I also do not recommend dark here. For large parts and almost 10 hours of printing it can give a big difference in color.

I don't mind answering questions and taking additional photos if needed.

Congratulations) You survived my longest post.

By Chris Daniele

The Kats padded silently through the rustling underbrush of the Copper Forest's outskirts. As twilight descended, the warm orange glow of the setting sun cast long shadows across their path. The air was alive with the sweet scent of blooming wildflowers and the distant whispers of nocturnal creatures stirring to life.

i told you sooooooooooooo 🫡