This Was My Favourite Top In TS3. Thank You Very Much! ❤️

annigo’s OMSP’s 1cm to 10cm

Hello!

Today I bring you the good old OMSP’s. Because I often realize how much I miss them in game. You may think that them are unnecessary, because you can move the objects up in height with the moveobjects-cheat (‘moo’) and because many creators provide their surfaces with a lot of slots. You’re right, but still I think it makes sense. How many times do I have a surface or whatever in game that doesn’t have the slots I would like. So it’s not up to me to edit them in S4S, because it’s not my creation. And in height you can adjust the objects in only 10cm steps. Then sometimes there is a gap between the object and the surface. Indeed there are a few OMSP’s, for example from Severinka or Kitcat Simporium but only for the classic surfaces and seating but not for every height. So I made 10 small OMSPs covering every centimeter, not Milimeter, that would lead too far. ^^  You can also adjust the height when the 'moo’ is active, so you can place almost any decoration for surfaces anywhere. Sometimes you don’t need to make a slot invisible if the object is larger and the slot is completely obscured by the surface. But you can make it invisible and visible again through the design tool, if you know exactly where it is. Here just are some examples…

But beware! If you plan to re-paint your walls after decorating with the Slots (OMSP’s), make sure that the moveobjects-cheat is disabled, otherwise EVERYTHING will end up in the family inventory. And even with the cheat off, the same thing happens when you place slots with objects on halfwalls. So do not wonder. It’s not my fault, it’s the game. As can be seen in the last two pictures, everything that is marked in yellow will disappear when papering…

Hope you like it. Have fun!  ^^

Visit me here

DOWNLOAD (SFS) 

or: GoogleDrive

Calm Bees

This small Mod adds a new “Calm Bees” Interaction to the Bee Box

Weiterlesen

Hi guys,

Here is an older Post by me on Sims4Studio .

Sometimes I find these 3D foundations with the thick trims just too much, especially if they are rather small houses. But I love the red bricks just at small cottages. So some time ago I made the appropriate foundations for the Industry Matters Walls without these trims. Maybe you can use it, so I like sharing it with you. Hope you like it. Have fun. :)

DOWNLOAD (SFS)

A Simlish “Wow” Sign

Hi Sims-Fans! 🤩

I'm just digging through the "My Meshes”- Folder and found this sign that I designed for myself some time ago. And remember what I did it for. I had built a restaurant in San Myshuno instead of the fitness center and wanted to have a new sign for it.

Hihi, because you have a stunning view from there, if your sims sit on the terrace, the name finding was not difficult for me, very simple: “Wow” in simlish font. I used the fantastic font CherryVanilla by Franzilla. 

You can find it here on MTS.

Many thanks for that Franzilla. 💗

I thought, maybe someone will find it useful for their own Sims-Business. However, you need the GP "Dining Out" to use the shield. It comes in 16 swatches and can be mounted on the wall and/or on the charts intended for that.

Have fun! 😘

DOWNLOAD (SFS no ad.fly)

@sssvitlans @sccfinds 😇

I know, I’m late for an Advent Candle Arrangement, but hey it is for XMAS too. And our Sims can celebrate Christmas all 28 Days. So I’ve been not too late? 👼 

This arrangement has 4 slots for place 4 candles. So our Sims can celebrate advent. Every sunday a flame more. 😊

The arrangement you can find in Decor/Plants and cost 100§ and the candle in Table-lights and it costs 1§. I hope, you will like it.

I wish you all a Merry, Merry Christmas and a Happy New Year! 🎄 🎅🏽 🎁 🍾 💝

Download SFS (without ads)

😍 😍 😍 This is soooo GORGEOUS!!!! 😍 😍 😍

Keep reading

My first Post on Tumbl 🤪

Hm, I know today is not Valentines Day but I don't want to wait until february to share these today finished files with you. Hope you like it. 😊

This set comes in 14 swatches. Excuse me for not making the mats in 10,000 different colors. I would lose patience about it. 🤭    I have chosen only for my taste these colors that fit the heart and that I myself would use in the game. 😚  But please feel free to create colors that you like. But please do not stand alone recolors. It's not about the meshes, these are just square planes. However, image processing costs me love, patience and time. Every single heart is hand-drawn and unique. The irregular shapes are so intentional. That's why I want this to be respected, with credit and mesh linked. Thank you. 💗

Get it without adfly here: http://sims4studio.com/post/100884

Mix’n Match Curtain Set vol. 1

Hey you all, today I will bring you a begin of a curtain Set which is going to expand gradually. You might think, 'What set, I see only 2 curtains here?' You’re right but this set contains 10 pieces. They are the basis for everything else.

I could have kept working, but I'm having trouble concentrating. Can't make such big sets anymore. Lose the overview, the concentration and finally the joy and it will never be uploaded. That's how it happens only piece by piece. I hope you understand that. 😏

The curtains comes in 16 different patterns and colours, so they have 32 swatches.The back side looks different then the front side. And I have to warn you, they are a bit high poly (4000 one side) because they needed 2 planes for front and back. I've turned the polygons down as far as they can, without any great loss of quality. Come on... the original has 40000 polys and this without front or back. 😇 You can ‘hang’ the curtains on window without the bb.moveobjects on. But für position the laterally curtain holders and curtain rods, the cheat must be activate and then adjust in high. I don't wanted to apply the rods directly to the curtains because the different versions and swatches. That would have been too much curtains swatches. In addition, it is supposed to be a mix'n match set, so surely other Rods and rails will come to combine.🧐

So it gives a left, middle and a right side for builds a endless rod. ;) The counter shader ensures that it is seamless. There is also a mid-rod holder for the "static". It looks like more realistic. Then it gives a left and a right single rod too, it fits only the rightly side from the curtain because the rings are positioned differently. 

Well, now I've talked you enough, now look yourself. 😊

Download here   SFS (without adf.ly or others)

TOU:

You have the permission for recolor my objects, but don’t offer my meshes but rather set a link to my side. Don’t load up my meshes on other pages and give them as yours!

And Simsdom, if you become aware of me, don’t offer and hide my creations behind from paysites, ad.fly or what ever. My stuff is free and you doesn’t have the right to make money with that!

Hello All 🤗 

In my opinion there are never enough bath rugs in the game. Sometimes the Sims have several bathrooms in the house. It does not always have to be the same mats in it, right? That's why I brought some again. 🤪

The textures are not cut out of an online catalog, but made by myself, so please don’t steal them. I hope you like them. If it is desired that certain color swatches have a different colored flower, I can still make this. I just did not want to do a hundred swatches, I hope you understand that. ❤️

DOWNLOAD (SFS) without ad's

You have the permission for recolor my objects, but don’t offer my meshes but rather set a link to my side. Don’t load up my meshes on other pages and give them as yours!

And SIMSDOM, if you become aware of me, don’t offer and hide my creations behind from paysites, ad.fly or what ever. My stuff is free and you doesn’t have the right to make money with that!

This is sooo cute! 😍

Functional Play Kitchen Collab

Many of you tagged me when @pandasamacc made animations for a bunk bed and I was super impressed with the quality of her work. I quickly found we are very similar in our ambitions, desire to push boundaries, and create something new. In early July we decided to team up and create a functional kids play kitchen together. It took two of us almost 3 months to make this and included fully custom animations, tuning, and objects. So, alas, we present to you a fully functional, kids play kitchen.

Quick overview of the play kitchen:

-Base game compatible

Usable by children and toddlers

Two interactions: play & pretend cook

Pretend cook results in a created object

Toddlers: random selection of 1 of 5 custom toys

Children: random selection of 1 of 3 edible recipes

Increases skills

Toddlers: Movement

Children: Motor, Creativity

Temporary outfit modification which adds chef hat

We are making final touches and modifications on the play kitchen now and expect to have it released to our patrons this weekend. The play kitchen will be early access for patrons only until October 17th and then available for everyone for free! You only need to be a patron of either myself or @pandasamacc​ to have early access to this - you do not need to be a patron to both of us. We really put so much effort into this and hope you enjoy it!

You can get early access through my patreon or @pandasamacc​ patreon. The play kitchen will be uploaded by Sunday, September 20.